How To Measure Mountain Bike Handlebars – The Easy Way

If you’re looking to buy mountain bike handlebars, you first need to measure the height of the handlebar. Once you know this, It is easy to calculate the angles at which they adjust.

This blog post will show you how to do all of this using simple steps and basic trigonometry. So go ahead and get measuring. Stand upright with the bike in front of you to measure your mountain bike handlebar’s width.

To ensure that the handlebar is straight, adjust it so that one end is at shoulder height and the other ends are even with your ears. Take a tape measure and start from one end of the bar to the other, making sure to keep the distance between measurements as constant as possible.

How To Measure Mountain Bike Handlebars

What You Need To Measure?

What You Need To Measure

Handlebar width is an important factor to consider when riding a mountain bike. Without the right width, you’ll experience discomfort and difficulty while riding. You’ll need a tape measure and a ruler to measure the handlebar width.

First, measure the distance from the center of the stem to the end of the handlebar. Note this down on paper. Next, use the ruler to divide this value in half – this will be your measurement for bar width (in inches). Finally, add 2 inches to your measured bar width to find out how wide they are in centimeters: 100cm + (2 x Bar Width)

How To Measure Mountain Bike Handlebars

How To Measure Mountain Bike Handlebars- 5 Easy Steps

There are a few ways to measure mountain bike handlebars. One way is to use a tape measure to measure the width and length of the bars. Another way is to use the ruler to measure the distance between the handlebar center and either end of the bar.

If you’re looking for a more precise measurement, you can use a method called triangulation. This involves taking three measurements from different angles around the bar and calculating the average value.

1. Get A Handlebar Tape Measure

Get A Handlebar Tape Measure

Having a handlebar tape measure is essential when bike shopping. Here are some tips on using it: 1. Make sure the tape measure is long enough to go around the handlebars without touching the stem or top tube. 2. Find the middle of the handlebar, then subtract 4cm from that measurement. 3. This is your bar width measurement (in cm). 4. Next, find your height in cm and multiply that value by 2 to get your total bike handlebar size (in cm).

2. Mark The Center Of Each Handlebar Tube

Mark The Center Of Each Handlebar Tube

It is important to properly adjust handlebar widths to provide a comfortable and safe riding position. To do this, you need to mark the center of each handlebar tube with a straight edge and measure the distance from the center of one handlebar tube to the center of the other.

This will help you calculate your hand position on each handlebar. Once you have calculated your hand position, compare it with the table below for relevant adjustments.

3. Find The Center Of Your Bars

Find The Center Of Your Bars

To ride a bike with precision and balance, important to position the handlebars in line with your chest. By doing so, you can easily control your bike’s direction and maintain a stable riding position.

To find the right handlebar width, measure the distance from the grip to the bar top using a tape measure. Compare this measurement against mountain bike brands’ size charts to understand which handlebar width best suits your body type and riding style.

4. Mark The Middle Of Each Bar With A Pencil

When it comes to bike handlebars, there are a few things that you need to take into account. First, the width of your bars will determine how wide they are in total. Secondly, the distance between the handlebar ends – is important as it will affect how far you can lean forward and back on the bike.

Thirdly, ensure your handlebars are at most 26 inches (66 cm) in width. Fourth, mark out an imaginary line down the middle of each bar with a pencil so you’ll know where to change them when necessary!

Tips And Tricks For Measuring Mountain Bike Handlebars

Tips And Tricks For Measuring Mountain Bike Handlebars

There’s nothing worse than riding a bike and feeling uncomfortable because the handlebars are way too wide or too narrow. If you need help determining what size handlebars your bike has, consult the manufacturer’s information or online guides like this. With these easy tips, you’ll be able to measure mountain bike handlebars in no time. To find the widest point on the bars:

  1. Use a tape measure.
  2. Add 2 inches (5 cm) to the width of the bar for each inch (2.54 cm) of width you want.
  3. Remember, wider bars are generally better because they provide more grip and stability while riding.

Use a tape measure: Many bike riders out there need to learn how to adjust their handlebars correctly. This can cause discomfort, fatigue, and even saddle sores. To minimize the chance of experiencing these problems:

  1. Use a tape measure when adjusting your handlebars.
  2. Start by measuring the distance from the bar end to the stem (or top tube).
  3. Measure the width of the bars at the widest point.
  4. Compare these measurements with other riders on your local trails and make necessary adjustments accordingly.

Make A Rough Estimate.

Making a handlebar size estimate is important to get the right bike for you. By measuring from the center of the bottom bracket to the end of the bar or looking at other bike parts, you can get an idea of what size handlebars will fit your needs.

If it’s impossible to measure, then look at bike parts and use those measurements as a guide. Also, make sure your hands will be comfortable riding on the handlebars – if they’re not, go for a different size. Handlebar tape can help indicate whether handlebars are too wide or narrow for your body type – make sure it covers both ends of the bars.

Get Help From Someone Else.

When it comes to bike handlebars, it is important to get them fitted the first time correctly. Not only will this make riding more comfortable, but it will also ensure that your bike handlebars are in line with the manufacturer’s specifications.

If your bike handlebars are not fitting well after trying out different adjustments, getting help from someone who specializes in handlebar fitting is a good idea. They can measure and adjust your bars accordingly to fit perfectly and provide extra comfort while riding.

Take Multiple Measurements

It is important to take multiple measurements to get an accurate handlebar size. You should measure the width, depth, and height of the handlebars and check the grips’ position – they should be at least 5cm from your palms when you are seated in the bike frame. Once you have collected all these vital data, it is time to compare them with those on a bike handlebar sizing chart. This will help you find your perfect fit for riding mountain bikes safely and comfortably.

Check that your handlebars are centered on both ends: When measuring the handlebar width, it is important to ensure they are centered at both ends. To do this, you’ll need to measure the distance between the center of each bar and your palm – if they are not equal, adjust the handlebars accordingly.

Measuring The Width Of Your Handlebars

Measuring The Width Of Your Handlebars

There’s nothing worse than riding on handlebars that are too wide or too narrow. To avoid this headache, measure the width of your handlebars first. Do this: stand in front of the handlebars straight from your ears to the ends of the bars.

Next, use a measuring tape to measure the distance between your forehead’s centerline and the bar’s edge. The ideal handlebar width is roughly equal to this measurement. If you’re unsure about your handlebar width, it’s best to get it checked by a bike mechanic.

Calculating Handlebar Angles Using Basic Trigonometry

Mountain bike handlebars can play a big role in how your bike handles. To get the handlebar angles just right, you’ll need to know the length of your bike and the width of your bars. Next, use basic trigonometry to calculate the angle between the bar ends.

You can also measure handlebar height using a meter or ruler if you need help determining how wide your bars are. Once you have all your measurements, it’s time to configure your bike for optimum handling.

How To Adjust Handlebar Angles

How To Adjust Handlebar Angles

Handlebar adjustments can make a big difference when riding a mountain bike. However, it can be tricky to find the right angle without the right tools. That’s why we’re here to help! To measure mountain bike handlebars, you’ll need a ruler and protractor.

The rule in front of you, draw a line from the center of your saddle to the handlebar’s top where you want it to be measured. Then use the protractor to find the angle that corresponds with this line – make sure it’s within 5 degrees of 0 degrees (downhill). Once you have found your handlebar angle, tighten all bolts, so they’re snug against each other but still allow some movement.


Handlebar width and handlebar depth are important dimensions when purchasing a mountain bike. If the bars are too wide or shallow, they can cause discomfort while riding. By measuring the width and depth of your current handlebars, you can ensure that you’re getting the right fit for your measured mountain bike handlebars. Thanks for reading.

Frequently Asked Questions

1.What Are The Benefits Of Measuring Your Handlebars?

Ans: There are a few benefits of measuring your handlebars. Maintaining the correct handlebar height improves your biking experience and increases your safety. Too high handlebars can throw you off balance and cause fatigue while riding, while handlebars that are too low can cause discomfort, instability, and problems with balance and coordination.

2.What Should Be The Dimensions Of A Good Mountain Bike Handlebar?

Ans: Ideally, mountain bike handlebars should be wide enough to fit your hands comfortably, with a few inches of width between the bar ends. They should also be at a comfortable angle that enables you to maintain a good riding position.

3.How Do I Adjust My Mountain Bike Handlebars If They Need To Fit Properly?

Ans: There are a few ways to adjust your mountain bike handlebars if they need to fit properly. You can use the included hex wrench or remove the stem and loosen the bolts. After that, you can push and pull on the handlebar to make it wider or narrower.

4.Which Handlebar Size Is Right For Me?

Ans: There’s no one-size-fits-all regarding handlebar size for mountain biking, as each rider will require a different handlebar size depending on their height and weight. Handlebars that are too big or small can cause discomfort while riding, especially if the handlebars are positioned too high or low on your bike.

5.How To Measure The Width And Depth Of Your Mountain Bike Handlebars

Ans: To measure the width and depth of your mountain bike handlebars, you’ll need a tape measure, a pencil, and some paper. With the tape measure in hand, measure from one end of the bar to the other.

Leave a Comment