New bike grips on your handlebars give you a firm grip on your handlebars and can help you maintain control of your bike when riding.
They come in a variety of shapes and materials, including rubber and neoprene, and can be purchased in varying degrees of thickness.
Cycling is good for the body and mind. It’s fun, gives you a great workout, and helps you to burn calories. Besides, it allows you to be in touch with nature. Some handlebar grips are very comfortable to grip, while others aren’t. The same goes for the handlebar grip that you’re using.
While some grips grip well, they may not be the most comfortable grip on the market. If you want to get the best grip for your handlebar, we have a guide for that. Read to find out how to install new grips on your handlebars effectively and comfortably.
9 Steps How To Install New Bike Grips On Your Handlebars
New bike grips on your handlebars are an exciting way to customize your ride and make it even more comfortable. These grips are made from various materials, including rubber, suede, and leather. They come in a variety of colors and patterns that can be matched with the color scheme of your bike.
It is recommended that new grips be broken in properly before using them for prolonged periods of time. This helps ensure optimal grip comfort and reduces the risk of injury or fatigue from poor-quality grips. Here are 9 Steps to install new bike grips on your handlebars:
1. Choose The Right Grips
It can be difficult to find the right handlebar grip for your bike. There are a variety of different options available, including slip-on and lock-on grips. Slip-on grips are easy to install and typically go on the handlebar without any tools. They are often made from rubber or plastic.
Locking-on grips require a special tool to install and typically grip the handlebar with bolts or clamps. Another type of handlebar grip is the lock-on grip, which is secured in place and doesn’t move around while riding. Mountain bike handlebar grips can provide extra cushion for the rider’s hands, reducing the impact of bike excursions.
When purchasing custom Harley-Davidson grips, it is important to make sure that the throttle isn’t slid up the handlebar too far, as this can cause control issues. Consider the shape, thickness, and texture of your handlebar grip when making a selection.
2. Remove The Old Grips
If you want to replace the grips on your handlebar, use a flathead screwdriver to prise the grip inner end up from the handlebar. Wear protective gloves to avoid damaging the grip. Use rubbing alcohol or a lubricant to help slide the grip off.
If the grip does not move easily, you can use a razor blade to cut the old grip off. After that, use a screwdriver or wrench to remove any bar-end plugs under the grip. Next, spray a quick shot of degreaser under the grip to ease removal. You can replace your handlebar grips in just a few minutes with some simple steps.
3. Clean The Handlebars
Cleaning the handlebars is essential to ensure a smooth and secure grip when installing new bike grips. So, to ensure a safe installation, it is important to clean the handlebars first with soapy water to remove any grease and debris.
After cleaning the handlebars, it is best to use lubricant such as alcohol-based products or adhesive spray to make the installation easier. Additionally, it is important to wait until the lubricant has evaporated before riding the bike. To ensure a safe and secure grip on the handlebar, it is also key to inspect the condition of the handlebar for corrosion or fatigue. By taking these steps, you can ensure a successful installation of new bike grips on your handlebar.
4. Install The New Grips
To install a new handlebar grip, you need to clean and lubricate the handlebar with a spray to reduce friction. Next, slip the handlebar grip on before the spray dries. Then attach the bar end plugs to secure it to the handlebar. To remove the old grip, use a long, slim screwdriver or similar tool and hairspray or WD-40 to loosen it. For sew-on leather city grips, you will need a 5 or 6mm allen key to loosen your levers and shifters and complete the installation.
5. Secure The Grips
Lock-on grips are a great way to secure new handlebar grips without them sliding or “throttling” while cycling. These grips are able to grip to handlebars tightly without the need for additional fasteners or screws, making them ideal for use with helmets and other safety equipment. They also allow for a more comfortable grip of handlebar and can provide important feedback to the hands during cycling.
Handlebar grips not only provide comfort but are also important to assist in stabilizing the handlebar during cycling. By using handlebar grips, you can stay safe while enjoying the benefits of smooth, efficient cycling. You can install new grip easily by yourself in under an hour with the right tools, so be sure to have everything prepared before starting the installation process.
6. Test The Grips For Comfort
When installing new bike grips, it is important to test them for comfort. You want to ensure the grip is the right fit before installing it on your bike. To do this, you must first test the grip to ensure that it is comfortable. This can be done by grabbing the handlebar with one hand and the grip with the other.
If you find that the grip feels too stiff or tight, try loosening handlebar slightly to make it more comfortable. Similarly, if the grip is too loose, apply lubricant to help secure it in place. Once you have successfully tested the new grip on your bike, ride away to make sure that it feels comfortable.
7. Adjust The Angle Of The Grips
If you want to install new grips on your handlebar, ensure to lubricate the handlebars before the installation using a lubricant such as WD-40. After lubricating the handlebar, it is important to twist the grip into the handlebar in order to match the contour of the bike.
If rubber handlebar grips are unavailable, you can use tape grips instead, wrapping the tape around the bar from the bottom with a rotating motion. If you want to install new handlebar grips while keeping your current handlebar look and feel, consider replacing only one side of your handlebar at a time.
This way, you can avoid damaging your handlebar or causing any unintentional wear and tear. Finally, remember to wash and clean the handles after removing old handlebar grips to keep them looking new and clean.
8. Tighten The Bolts
To install new bike grips, you will need to tighten the bolts that clamp onto handlebar components. Before you start, ensure that all the components are in the right position and use the recommended torque settings for each component. Next, apply a small amount of lubricant to the bolt to help it grip onto the handlebar more easily.
Tighten the bolts to ensure they are secure and stable on the handlebar. After installation is complete, check the bike to make sure that all the components are tight and secure. This will ensure a better grip and prevent slippage during use.
9. Check For Proper Installation
To install new bike grips on your handlebar, ensure the handlebar is clean and lubricated with WD-40. Wrap the plastic fasteners around the handlebar to keep the grip in place.
Next, apply alcohol or adhesive spray to lubricate the handlebar for easier installation. After installing new bike grips, wait for the lubricant to evaporate before riding the bike. To secure the grip, attach bar end plugs to the handlebar. When all of the installation steps are complete, you can enjoy a more comfortable and secure ride.
Conclusion
New grips for your handlebars are the perfect way to make your bike more comfortable to ride and improve grip. And with the above instructions, installation should be a breeze. However, you might want to try them out on an old bike grip to see if they fit properly before installing them on your bike. This will help ensure that you get comfortable grips as soon as possible.
The right grip can also help improve your overall comfort level while biking. Grips come with varying levels of padding to suit the needs of different riders. Some grips have extra-thick padding for extra comfort and stability during long rides, while others are more minimalistic for more efficient handling. Padding also comes in varying levels of softness, from very soft to extra-soft, depending on personal preference and usage conditions.
Frequently Asked Questions
1.How Do You Put New Grips On Handlebars?
Ans: To put new grips on handlebars, you will need the following:
– A screwdriver or similar metal tool
– A 5 or 6mm allen key
– WD-40
– Hairspray
– A razor blade
– Soapy water
– An alcohol-based product
2.What Is The Easiest Way To Install Bike Grips?
Ans: Installing bike grips can be done quickly and easily by using zip-ties. There is no need to wait for the grip to dry, as the grip will be tightly secured in place once it is installed. The process of installing new grips on a motorcycle typically takes around one hour to complete, with the use of a lubricant to make the installation easier.
It is also recommended to have a copy of the factory service manual for reference if you have any questions about the installation process.
3.Can You Replace Handlebar Grips?
Ans: You can replace handlebar grips with the right tools, such as a slim screwdriver or allen key, hairspray, and WD-40.
To replace particularly stubborn grips, you can use a flat head screwdriver, a can of WD-40, and Windex or a similar window cleaner.
When replacing handlebar grips, it is important to methodically remove the previous grips and to clean the handlebar with a non-residual cleaning agent like Windex or a similar window cleaner.
Alternatively, bar tape can be used to grip the handlebar in multiple hand positions.
4.How Do You Put Grips On A Bike Without A Compressor?
Ans: To install grips without a compressor, you can either use zip-ties or lock-on grips. With zip-ties, simply tie the grip to the handlebar in the desired position and tighten the ties to secure it.
Lock-on grips have metal collars that can be fastened to the handlebar with Allen bolts. When installing brakes on a bicycle, you will need to replace the brake pads and adjust the brake levers.
5.What Is The Best Way To Install New Bike Grips On Your Handlebars?
Ans: The best way to install new bike grips on your handlebars is to use a slim screwdriver, allen key and hairspray. First, loosen the levers and shifters by using WD-40.
Then, you can use the slim screwdriver to remove the old grip and replace it with the new grip. Finally, tighten the levers and shifters using the allen key. Your bike will now look and feel great!